Spirit System

Hi Thomas

in the meantime the changes you wrote are stored to the FBL.
Made about 30 flights ( range 155 up to 190 in steps of 5 ) ,
without any success - the tail is still wagging; the higher the
RPM's the higher the frequency of the wagging...
It seems that even decreasing the value of the gain ...

thanks for the changes;

I'll test and give you feedback...

Kind Regards

Hi Thomas

thanks for your answer;
below the requested info...

Kind Regards

Hi all

the tail of my heli is constantly wagging ( in hover ) with different RPM's 1'400, 1'500, 1'600, 1'700, 1'800 , 1'900 and 2'000. The higher the RPM the higher the frequency of the wagging.

When I speed up for a loop there is a wimmering noise clearly hearable ( the tail servo is constantly ...

Hi Thomas

reading through the forum I can see that you must be very busy;

in any case i would appreciate a short message about the above mentioned matter.
( have trees in the area and the behaviour is a risk of crashing my heli )¨

Thank you very much
Kind Regards

Roland

Good evening

setting the return height to 90m ( about high trees in the area ) the heli flies back to the lift off point ( mode 4 ).
As soon as the RTH is active the electronic of Spirit moves the TS and therefore the heli dives to about 30m height during the flight back.
As soon as the model is at ...

Good afternoon

setting the return height to 90m ( about high trees in the area ) the heli flies back to the lift off point ( mode 4 ).
As soon as the RTH is active the electronic of Spirit moves the TS and therefore the heli dives to about 30m height during the flight back.
As soon as the model is ...

Hi ZeXx86

in the setup of the GeoLink there is a check box under "settings" : "POSITION HOLD"
Do I override the SPIRIT RS cfg when checked ?
( this would explane the staying of the helicopter upside down )

In the SPIRIT RS setting there can be set the priority of the sticks ( range 0-16 )
When I ...

Hi ZeXx86

Thanks for your answer; I've to check on your points and let you know ;
It probably takes a while as we'll have very heavy rains the whole week...

Kind Regards
Roland

to my last post

Checking the log on the spirit rs the sensor for altitude seems to work but doesn't
display the value on the transmitter. In the attachment the 4dl file...

cheers
Roland