I re downloaded the update making sure it was 4.0.0r3.
Still ends with reboot failed.
Search found 85 matches
- Thu 07. Aug 2025 22:41:06
- Forum: Support
- Topic: Wifi Link Update Failed
- Replies: 2
- Views: 50
- Wed 06. Aug 2025 15:04:22
- Forum: Support
- Topic: Wifi Link Update Failed
- Replies: 2
- Views: 50
Wifi Link Update Failed
I have 2 WiFi Links modules on 2 seperate Spirit GT units.
I downloaded the latest FBL update, Software update and Wifi Link update (4.0.0)
The FBL units and software all updated fine.
When I power on the FBL and connect my computer to the Spirit WiFi Link. Then start the Spirit WiFi Link updater ...
I downloaded the latest FBL update, Software update and Wifi Link update (4.0.0)
The FBL units and software all updated fine.
When I power on the FBL and connect my computer to the Spirit WiFi Link. Then start the Spirit WiFi Link updater ...
- Wed 23. Jul 2025 2:55:40
- Forum: Support
- Topic: flight style impressions
- Replies: 10
- Views: 41874
Re: flight style impressions
I can confirm that.
After I change things like collective pitch or cyclic pitch I always double check the 6° geometry setting just to make sure. It never needs to be re-adjusted.
After I change things like collective pitch or cyclic pitch I always double check the 6° geometry setting just to make sure. It never needs to be re-adjusted.
- Sat 19. Jul 2025 12:26:30
- Forum: Support
- Topic: Pitch pumps tail moves to the Right
- Replies: 6
- Views: 28617
Re: Pitch pumps tail moves to the Right
I do believe that is what he meant.
Use Rate Mode (Gyro set to Zero) to mechanically setup the tail so the tail stays still in a static hover.
Once you have the correct amount of tail blade pitch set to hold the tail in Rate Mode in a static hover, then set Gyro to say 55. Then adjust from there ...
Use Rate Mode (Gyro set to Zero) to mechanically setup the tail so the tail stays still in a static hover.
Once you have the correct amount of tail blade pitch set to hold the tail in Rate Mode in a static hover, then set Gyro to say 55. Then adjust from there ...
- Sun 15. Jun 2025 13:00:35
- Forum: Support
- Topic: limit tab / pitch section.
- Replies: 5
- Views: 358
Re: limit tab / pitch section.
Don't over think it or put too much faith in that number under the slider.
Also just because one model has a setting of 135 in Spirit to get 13°, that does not mean it will be the same on another model.
As said, set the slider to get your desired pitch and move on.
Also just because one model has a setting of 135 in Spirit to get 13°, that does not mean it will be the same on another model.
As said, set the slider to get your desired pitch and move on.
- Sun 15. Jun 2025 3:01:11
- Forum: Support
- Topic: limit tab / pitch section.
- Replies: 5
- Views: 358
Re: limit tab / pitch section.
I wouldn't be to concerned about the number.
Simply adjust until you achieve your desired pitch
Simply adjust until you achieve your desired pitch
- Sat 29. Mar 2025 13:01:32
- Forum: Support
- Topic: WiFi module problem
- Replies: 4
- Views: 1383
Re: WiFi module problem
Are you sure you have it plugging into Spirit correctly.
I only ask as it's easy to over look. I've done it myself.
Sounds like the power lead is connected correctly or the blue light wouldn't be on. The other one is orientated to the top and middle pin of the sys port
I only ask as it's easy to over look. I've done it myself.
Sounds like the power lead is connected correctly or the blue light wouldn't be on. The other one is orientated to the top and middle pin of the sys port
- Wed 01. Jan 2025 9:37:21
- Forum: Support
- Topic: No Flight Pack Voltage Telementry
- Replies: 6
- Views: 620
Re: No Flight Pack Voltage Telementry
I don't follow.raceboy1 wrote:Yea, I know how to get voltage with the Receiver, but then you have to spend an extra 80.00 to accomplish that.
What are you spending this 80.00 on?
The nessecary wire with connector is supplied with the Rx.
It's just a matter of running the wire and plugging it in.
- Tue 31. Dec 2024 18:14:46
- Forum: Support
- Topic: No Flight Pack Voltage Telementry
- Replies: 6
- Views: 620
Re: No Flight Pack Voltage Telementry
I run pretty much same setup, Spirit GT, AR6610T, NX10.
I believe the only way to get telemetry for Volts is with the supplied wire that comes with the AR6610T which works very well.
You can get Telemetry for mAh consumed tho. Believe it is under Flight Pack on the Telemetry Screen.
I believe the only way to get telemetry for Volts is with the supplied wire that comes with the AR6610T which works very well.
You can get Telemetry for mAh consumed tho. Believe it is under Flight Pack on the Telemetry Screen.
- Fri 20. Dec 2024 7:49:04
- Forum: Support
- Topic: spirit GT Question
- Replies: 2
- Views: 415
Re: spirit GT Question
What he said
Nailed it!!
Nailed it!!