Spirit System

thanks Rburrow. You got it. I wasn't plugging the yellow wire in the middle. Part of my confusion was that the HW ESC comes with a standard JST and not a single pin, so I had to cut the connector to plug it in the middle versus yellow right. But it worked well after that.

That didn't seem to solve the issue. I flew it starting out with a 50% throttle curve and could tell it was still too high. Unfortunately, as I was trying to come down the tail blade control arm popped off and I had to come down in a spin.

I'll get it on the bench and see what the rpm tester says.

It seems that this is due to high headspeed. I reduced my IU1 to 30% which is obviously not accurate but it reduced the motor speed enough to have 2 uneventful flights!

I am using the spirit governer (yellow signal wire plugged into fbl, governer checked). However, upon checking the settings they ...

Hi,

I thought I would post this here just in case as well. I have a new to me M4 that I've put together and installed a spirit GT on. It develops what can be described as a flight ending wobble randomly. I have attached a video: https://youtube.com/shorts/P59WYXQuYOI?feature=share

Originally, I ...

That would be wonderful! Yes, please PM me with details.

I seem to have purchased a faulty unit second hand as no amount of plugging, flashing, etc will get this unit to boot up. Thats on me. I am going to trash this unit and get a newer one. Thanks for the assistance!

When i click update to 3.6.2, it fails. Meaning i hit recovery mode, i replug the power and it gives me a message that says it failed and to use this guide: https://manual.spirit-system.com/index.php?title=Flashing_Failed

So i am back at the start. I know its not the USB as I programmed my Spirit ...

Ah, your saying my unit needs new firmware--not that i need the old software. Got it.

Hi,

I have a Spirit GT and a Spirit Pro which I procured second hand. The GT works fine with the current software 3.6 but the Pro says it requires 3.2---Can you send me a link to download 3.2?