Spirit System

I just checked and I'm on 3.7.0

I went into the Advanced section and there's no Stabi/Rescue Algorithm , where you can change to High Immunity

Hey Guys,

First I have four different Heli's flying on the Spirit

I had just finished setting up another Sab 700 Nitro and was in the front yard just hovering to test out the OS Motor.

I went up about 20 feet and i flipped on my Self Level for a test.. When I did this the Heli did a hard back ...

I have Five Heli's set up with the GT FBL and Geolink. And all except this Blade 330 fly perfect.

This heli was flying great before a crash. And everything on the head was replaced

The Swash is perfect, the blades are 0 degrees at mid stick and tracking is also perfect.

But when I go to take off ...

I have set up my gt many times with wizard. On attempting take off with my Blade 330 it violently dives to the right just before lift off.
Swash is level. Servo horns are perpendicular to servo bodies.
Any suggestions?

OK, I tried clearing the logs, but that made no differance

I attached the Backup file for this Helicopter, hopefully you can use that

Thanks,

John

fIRST, i HAVE FIVE hELI'S SET UP WITH THE SPIRIT GT AND THE GEOLINK

And the below is the only one that I'm having this problem with .

On my 580 Electric the RTH and Hard Deck will not activate when I first initiate

I have to let the motor spool up and then hit Throttle Cut.

After doing the ...

Hi, I have four different GT FBL's and Geolinks installed on four different Heli's
I have the Hard Deck set at 3 meters with is about 10 feet.
And yea I know, that's probably too low.
I activate the Hard Deck after I get up
however, the hard deck activates at around 30 + feet in the air, even thou ...

I've been trying to get my Geolonk to Calibrate with no success.

This is the fourth unit that I've installed, so I'm pretty familiar with the process.

However, on this one I'm having no luck even after multiple attemps

When I click the Calibration Tab, then I power down the unit and re power back ...

I did the same thing. Make sure the picture of the GeoLink is oriented correctly and also make sure the nose is pointing to the north.