1.3.0 firmware file

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
User avatar
Coco66
Posts: 433
Joined: Sun 26. Jul 2015 8:17:50
Location: Madrid, Spain / Torino, Italy

File is .4df instead of .bin, roughly 120KB instead of around 50KB, and no published checksum... sure?
Oxy 2 ♦ X-Vert ♦ Warp 360 ♦ Blade 450X ♦ Blade 450X Nightflyer ♦ Goblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQX ♦ LadyMQX ♦ nano QX ♦ nano QX FPV ♦ Inductrix ♦ DX8 G1
Top
MyRCode
Posts: 36
Joined: Sun 06. Sep 2015 20:16:44

I just flashed it... Going to the field right now. I'll let you know in
about 20 minutes

Sent from my XT1254 using Tapatalk
Top
ZeXx86
Site Admin
Posts: 12833
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Please check our release notes, you can find more details about the new firmware format here.
Spirit System developer
Top
MyRCode
Posts: 36
Joined: Sun 06. Sep 2015 20:16:44

It flies! Don't forget to re-enable your governor after the update.... And download the new software on your phone if you're using it

Sent from my XT1254 using Tapatalk
Top
Malc1
Posts: 169
Joined: Thu 07. May 2015 22:33:47

Just wondering, did you unplug all the cables from the unit before carrying out the update?
Top
MyRCode
Posts: 36
Joined: Sun 06. Sep 2015 20:16:44

Malc1 wrote:Just wondering, did you unplug all the cables from the unit before carrying out the update?
Nope... Just plugged in the USB cable
Top
Malc1
Posts: 169
Joined: Thu 07. May 2015 22:33:47

OK I have downloaded the file but am unable to update the unit as the firmware update software is only looking for a .bin file.
There is no option to search for any other type.

Windows XP. Any ideas?
Top
ZeXx86
Site Admin
Posts: 12833
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

You have to download and install also the new software.
Old software does not support new firmware format.
Spirit System developer
Top
Malc1
Posts: 169
Joined: Thu 07. May 2015 22:33:47

OK will try this now.
Top
Malc1
Posts: 169
Joined: Thu 07. May 2015 22:33:47

Updated successfully and Nitro governor set up again.

On the bench the first thing I've noticed is that the throttle servo still goes over to full throttle but it no longer pulses continuously when it gets there.

I'm using a Jeti DS16,do I need to update a file for this to work correctly?
Top
Post Reply

Return to “Support”