Spirit Pro: Ultraguard on CH0?

[rolandk]

Hello Tomas,

can I connect an Optipower Ultraguard at the CH0 Pin of the Spirit Pro? (The CH0 Pin is my last free pin).

Thanks a lot in advance.

With best regards

Roland

[ZeXx86]

Hello Roland,

yes, without any problem. With AUX2 it is actually the best port for this purpose.

[rolandk]

Hello Tomas,

thank You very much for the reply.

I wanted to use AUX2 for the second power supply cable from the ESC/BEC for more security (the Heli is a TREX 700).
Therefore CH0 is the ownly free port.
Do You think, it is better to use CH0 for the second power cable and AUX2 for the Ultraguard?

With best regards

Roland

[ZeXx86]

You are welcome.

It does not matter, you will not notice any difference in flight. So you can freely use CH0.