[SOLVED] futaba telemetry

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
User avatar
urgno
Posts: 274
Joined: Tue 21. Aug 2018 13:05:23
Contact:
Contact urgno

Hello ;)
I was looking at this link and trying to configure the spirit and the t16sz
http://manual.spirit-system.com/index.p ... _Telemetry
(all ok with cables)

but there are some inconsistencies:
> KONTRONIK as the Sensor. This will overwrite automatically next 6 slots
on 16sz the sensor is called Kontronik ESC but will overwrite next 8 slots

i am unable to find this telemetry variable:
> EXT-VOLT [%] - Vibration level (0 - 10% is normal level)

any help ?
thanks :)
Last edited by urgno on Thu 23. Aug 2018 9:04:34, edited 1 time in total.
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Hello,

in the latest firmware it was recently changed. Regarding sensor name it is OK, there is only difference between Futaba radios.

Ext-volt shouldnt be thete anymore. We will update the manual.
Spirit System developer
Top
User avatar
urgno
Posts: 274
Joined: Tue 21. Aug 2018 13:05:23
Contact:
Contact urgno

thanks for fast reply :)

so is not possible to see the "Vibration level" on telemetry ?

http://manual.spirit-system.com/index.p ... _telemetry
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Vibration level is displayed as BEC CURRENT.
Please check our updated Wiki page.
Spirit System developer
Top
User avatar
urgno
Posts: 274
Joined: Tue 21. Aug 2018 13:05:23
Contact:
Contact urgno

wonderful !! thanks a lot :)
Top
Post Reply

Return to “Support”