Hobbywing 130A V4 ESC Spirit Pro OpenTX Telemetry

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
Matzer27
Posts: 10
Joined: Tue 01. May 2018 15:26:53

I´m using a Hobbywing 130A V4 ESC with a Spirit Pro and a FrSky Horus X12. I deleted all sensors and searched for new sensors in my Horus TX. On my Telemetry screen are now 9 Sensors.
I get information on Temp, RPM, 5120 (Gov) and Fuel % (Vib). RSSI and RxBt is also ok.
But no readout on RB1V, RB1A, RB1C and RB2C.

What can I do to get the missing information?
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

You have to enable HobbyWing ESC telemetry according HobbyWing ESC telemetry guide :)

http://manual.spirit-system.com/index.p ... _Telemetry
Spirit System developer
Top
Matzer27
Posts: 10
Joined: Tue 01. May 2018 15:26:53

HobbyWing ESC telemetry was enabled! --> No incication on some parameters!
I made an update for the HW again, disabled the telemetrie in the spirit. Enabled the telemetrie again in the spirit--> still no indication of some parameters!!!
Top
Post Reply

Return to “Support”