[SOLVED] UniSense not detected on Spirit RS

[ahahn61]

Hi All,
anybody tried to use an SM UniSens-E with Spirit RS?

According instructions I tried it on both E1 and EXT. The UniSense was not detected in any case.
The same sensor works fine with standard JETI receivers like REX-10.

http://manual.spirit-system.com/index.p ... _Telemetry

I use a DC-24 with latest software and device description files, UniSens and Spirit RS are up-to-date as well.

Any ideas?

Alois

[ZeXx86]

Hello,

you have to set EX Bus protocol at the E1 port. Standard is JETIBOX/Sensor which is likely wrong for the sensor.

[ahahn61]

Hello,

you have to set EX Bus protocol at the E1 port. Standard is JETIBOX/Sensor which is likely wrong for the sensor.

Great hint, I missed the lastest update SPIRIT-3-1-RS.zip which includes the REX-RS.bin file. Now it works!

Just a minor note. The SM UniSense is listed with a label "UniS-E", but Spirit RS seems to havo no label.

Screen028.png (11.62 KiB) Viewed 345 times

Screen029.png (21.36 KiB) Viewed 345 times

regards
Alois