Thank you!
So I got back to V4.0.5. I’m curious to see if the data logging is working now.
Regards Philipp
All Controls Suddenly Gone!
-
Michldigital
- Posts: 22
- Joined: Sun 23. May 2021 9:13:35
Hi,ZeXx86 wrote: Mon 05. Oct 2026 12:22:43
Here you can download this PC software:
https://spirit-system.com/dl/settings// ... .6-win.exe
At the Update tab you will see new JETI Integration submenu where the app will automatically update the BIN file just by one click. You only have to connect your Spirit unit and JETI radio using cable.
Is this a Beta Version ? Or Is it safe zu use it?
Greetings
Maik
On the subject of logging:
V4.0.6 shows maximum recording time depending on the selected parameters. And recording at 500Hz needs A LOT of memory! E.g. with the three regulations (aileron, elevator, rudder) activated, space is exhausted after just three minutes. As a consequence the software can't read anymore obviously, finds no data at all. So any flight longer than three minutes is impossible to analyze.
I tried at 50Hz with some more parameters activated and needed almost half of the memory during a flight of slightly more than eight minutes. It took quite some time to read it out but it worked!
Regards Philipp
V4.0.6 shows maximum recording time depending on the selected parameters. And recording at 500Hz needs A LOT of memory! E.g. with the three regulations (aileron, elevator, rudder) activated, space is exhausted after just three minutes. As a consequence the software can't read anymore obviously, finds no data at all. So any flight longer than three minutes is impossible to analyze.
I tried at 50Hz with some more parameters activated and needed almost half of the memory during a flight of slightly more than eight minutes. It took quite some time to read it out but it worked!
Regards Philipp