Theta servos
Using theta servos on my new build with a new Spirit 3 FBL. I can’t find any listings for the pulse and frequency settings. They have a range on their website if using their program box. I just want to use out of the box settings. Please help, thx.
• Max Current Limit: 4A (conservative default to protect flybarless (FBL) units and power systems, though some users adjust to 5A or higher depending on the helicopter model).
• Pulse Width / Band: Wideband (1520 µs) default, with optional narrow band (760 µs) support for specialized tail or cyclic setups.
• P & D Gains (Proportional / Derivative): Tuned for balanced, stock factory response.
• Dead Zone: Standard factory precision setting.
• Neutral Point: Centered (0 offset from baseline assembly).
• Soft Start: Enabled at a standard default ramp-up rate.
• Pulse Width / Band: Wideband (1520 µs) default, with optional narrow band (760 µs) support for specialized tail or cyclic setups.
• P & D Gains (Proportional / Derivative): Tuned for balanced, stock factory response.
• Dead Zone: Standard factory precision setting.
• Neutral Point: Centered (0 offset from baseline assembly).
• Soft Start: Enabled at a standard default ramp-up rate.