Wave

In case you would like to see some new feature in the software you can share it right here!
You can also report issue or odd behavior here.
Post Reply
Eura
Posts: 15
Joined: Sat 04. Nov 2023 19:45:16

Hello Spirit Team,
I am using the Spirit Wave together with a Spirit W1 and really appreciate being able to set up the entire unit directly from the transmitter without needing a PC.
However, I noticed one small missing detail during setup: When assigning a switch to a stabilization mode (e.g., Stabi Normal) directly in the Wave's setup menu, there is no live status indicator showing whether the function is currently active or inactive (like the 0 / 1 indicator in the PC software).
To be 100% sure that my switch assignment was actually triggering Stabi Normal, I still had to connect the W1 to my PC just to verify the active state.
Are there any plans to add a simple live status indicator (e.g., Active / Inactive or 0 / 1) directly inside the Wave's Stabi menu in a future firmware update? That would make a PC-free setup at the field completely self-contained and much more reassuring.
Best regards,
Lutz
Post Reply