Second DSMX satellite is not working after update to v2.0.0

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
UFOking
Posts: 32
Joined: Wed 29. Oct 2014 16:18:01

So I got it to work somehow.

First I tried to swap the satellites. Connected Spektrum satellite to the adapter and it didn't bind (no binding light, nothing).
Than I connected the Lemon RX satellite directly to sat port and it binded.
Than I connected the Lemon RX satellite to the adapter, got the binding light and that it went dark....again nothing but at least there was light for a few seconds.

So I than found out, that if the satellite is first binded directly through sat port and than connected to the adapter, I can see the binding light for a few seconds...

I was doing that back and forth, trying different combinations and than all of a sudden, both satellites binded (spektrum to sat port, lemon rx with adapter) and now everything is working.

I think that the problem is definitely in the adapter cable, because I also connected lemon rx satellite to AR7200BX FBL and it binded everytime.
Top
Alyon187
Posts: 131
Joined: Sat 14. Nov 2015 8:08:20

I would be careful combining two different brand sats. Its generally not a good idea. Keep it either both lemon, or both spektrum.
Top
Post Reply

Return to “Support”