Hobbywing v4 60a log full of rpm sensor noisy

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
Thorvald
Posts: 18
Joined: Sun 15. May 2016 21:08:12

Just thought I'd add my findings, I am not using the Gov but I have it enabled to get RPM from my Castle ESC.

My logs also have a number of "RPM Sensor noisy" messages though not full, maybe 5 to 10. I'll have to count.
Top
sacha
Posts: 34
Joined: Thu 14. Apr 2016 18:43:40

Just for your information. I use a Spirit Pro on my velos880 with a HW platinum 160A v4.
I do not have rpm sensor noise problems.
Sacha
Top
IamCxZ
Posts: 5
Joined: Mon 13. Jun 2016 10:35:23

First try with my HW 60A V4 I couldn't get a reading until I bumped the filter to 9 - Never checked the logs...

Upgraded to HW firmware PL-4.0.03, filter down to 7, no problem with my low HS Warp :)
(nothing in the logs except good health, gov engaged etc)

Just bumped filter down to 6 (default) quick spoolup, everything works, nothing in the log...

Cables are a bit of a mess, still no problems.
Attachments
Warp_right_side.jpg
Top
elfew
Posts: 226
Joined: Sun 25. Aug 2013 9:14:16

Just my 2 cents - no issue with 130a HW Platinum v4 and Spirit gov
DX9 - Chase 360 - Spirit
Top
Post Reply

Return to “Support”