Rescue not level

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
proctormw
Posts: 33
Joined: Sat 08. Feb 2020 19:39:19

One of my spirit pro units when doing the rescue function banks and goes forward every time. After reading on another forum is there a way to do a sensor calibration.
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Hello,

have you checked this page?

http://manual.spirit-system.com/index.p ... ise_Rescue
Spirit System developer
Top
proctormw
Posts: 33
Joined: Sat 08. Feb 2020 19:39:19

Ok will check Stabi Correction
Extended Signal Processing and see if that helps. Thanks
Top
Post Reply

Return to “Support”