[SOLVED] Low altitude crash after hitting rescue switch

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
UFOking
Posts: 32
Joined: Wed 29. Oct 2014 16:18:01

Which transmitter do you have?
Top
Marian
Posts: 37
Joined: Wed 20. Aug 2014 5:13:06

Spektrum DX18
Top
ajbwn
Posts: 50
Joined: Fri 24. Oct 2014 20:57:19

UFOking wrote:Which transmitter do you have?

DX9
Top
Marian
Posts: 37
Joined: Wed 20. Aug 2014 5:13:06

One correction on my statement that 60 % pitch in rescue is near hover. It is not. I was mistaken that 60% equals radio stick position around 10% above mid stick for hovering. But the rescue pitch range 0-100 equals pitch range between 0 to maximum pitch. So the near hover pitch setting in Normal Rescue Mode is more like 30 rather than 60. At 60 the heli will still climb quite rapidly. So, my settings are now as follows

Bank 0 Acro Rescue pitch -80 for about half a second and than my Tx Sequencer switches to Bank 1 Normal Rescue with pitch -30.
Top
Dawiev
Posts: 139
Joined: Sat 28. Feb 2015 3:08:53

Hi Marian, can you make this info public, or send me a PM with the details too please ?

I have a DX9, but not the skills to extract all its potential.

Ps. Props for your persistence to get it to this point !!
Top
Thrasher
Posts: 14
Joined: Mon 05. Jan 2015 1:54:59

Dawiev wrote:Hi Marian, can you make this info public, or send me a PM with the details too please ?

I have a DX9, but not the skills to extract all its potential.

Ps. Props for your persistence to get it to this point !!
Would request this info as well, please. Also using a DX9
well done Marian :D
Top
Post Reply

Return to “Support”