Spektrum adaptor - Output Voltage?

[Malc1]

Should the voltage coming out of the adaptor be exactally 3.3v?

I have checked the one that I have extended the input cable on and my spare one and both are outputting 3.2v. Is this correct?
Is this going to make any different to the governor sensor?

[ZeXx86]

It should be 3.3V or very close to it. Unfortunately not all multimeters are very precise, but even if there is 3.2V it is not a problem.

[Malc1]

Ok thanks.
Both at 3.2v.
I thought at first that lengthening the input to the PCB on the one had caused a slight voltage drop.