Spirit gets no voltage, no red LED ...

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
Franky13
Posts: 135
Joined: Tue 30. Dec 2014 7:50:36

Hello Thomas!

According to the new firmware version 1.2.1 I have no power in the Spirit?
Have some trials started, no success.
The red LED is off!
Where is the problem?

Greeting Frank
Top
ZeXx86
Site Admin
Posts: 12832
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Hello Frank,

it seems that flashing process was not successfull so that is the reason why unit is not working.
Did you checked the firmware file (checksum) before update?

It is possible to flash the firmware again in recovery mode if this is the case.
Spirit System developer
Top
Franky13
Posts: 135
Joined: Tue 30. Dec 2014 7:50:36

OK,
but how can I reset the Spirit again?
I can not open the software ...
Top
ZeXx86
Site Admin
Posts: 12832
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

I have sent you PM with the guide for flashing in the special mode.
Spirit System developer
Top
Franky13
Posts: 135
Joined: Tue 30. Dec 2014 7:50:36

Hello Thomas!
Thanks for the instructions but I think that I will send you the Spirit.
how do we go on?

Greeting Frank
Top
Post Reply

Return to “Support”