How to hookup bluetooth to red unit

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
Alyon187
Posts: 131
Joined: Sat 14. Nov 2015 8:08:20

Ive got a spare generic bluetooth that I used on mt vbar and believe will work but I dont know where to connect what pins. Ideas?
Top
ZeXx86
Site Admin
Posts: 12832
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Hello,

you can connect module to the unit, but you have to reprogram it for Baudrate 57600 else it will not work. VBar has different baud rate.
Maybe this scheme will help you.
Attachments
btscheme.png
Spirit System developer
Top
Alyon187
Posts: 131
Joined: Sat 14. Nov 2015 8:08:20

Ok thanks Tomas. I went ahead and ordered a bt module from you guys. One more quick question, ive got a hw 100a v3 on my goblin 380 and only use the throttle/bec cable connected to the red unit so ive got the other bec cable just secured to the frame. Could I use that extra cable to power the bt unit and then the other bt connector to the system port?
Top
ZeXx86
Site Admin
Posts: 12832
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Yes,

this will work fine. You will only need adaptor to connect both servo cables together, because both are with same end.
Spirit System developer
Top
Adrian
Posts: 204
Joined: Thu 08. Oct 2015 14:43:12
Location: Switzerland

use a servo V-cable. Edit: Y-Cable 8-)
Last edited by Adrian on Thu 10. Dec 2015 14:05:32, edited 2 times in total.
Oxy4max SpiritPro + HW // SOXOS 550, SpiritPro, HW120A V4, 920KV // SOXOS 600, SpiritPro, HW160A, Pyro650 // SOXOS Strike7, SpiritPro, HW160A, Pyro750 // Skywing Spirit Aero // FrSky Horus X10S + Taranis X7 /
Top
Alyon187
Posts: 131
Joined: Sat 14. Nov 2015 8:08:20

Thanks Tomas.


Do you mean a Y cable? Never heard of a v cable.
Top
Post Reply

Return to “Support”