Tail kick and revo-mix at 10 (limit)

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
User avatar
Joeri_Plees
Posts: 28
Joined: Tue 13. Oct 2015 22:29:39

Hello everyone I have setup my Oxy 3 Qube main and tail with the spirit fbl and I have a little tail kick and the p gain and revo-mix is at the limit

Pgain at the max before tail hunting

So what can I do now or what is the problem to much pitch maybe for a 3 blade?

Best regards Joeri

Verstuurd vanaf mijn SM-N910F met Tapatalk
jgiannakas
Posts: 183
Joined: Sat 02. Jan 2016 12:17:50

Increase your piro consistency. You shouldn't need any revo mix. I was having the same issue and just upped the piro consistency parameter and was all gone on my 450L

You'll probably need to drop the p gain a bit as well.
User avatar
Joeri_Plees
Posts: 28
Joined: Tue 13. Oct 2015 22:29:39

Ok thanks I try that and lower the revo-mix again then?

Verstuurd vanaf mijn SM-N910F met Tapatalk
jgiannakas
Posts: 183
Joined: Sat 02. Jan 2016 12:17:50

Yeap you shouldn't need any revo mix
User avatar
Joeri_Plees
Posts: 28
Joined: Tue 13. Oct 2015 22:29:39

jgiannakas wrote:Yeap you shouldn't need any revo mix
Thanks for the tip man that's works great! I only have tail wag now... And before not :/

Best regards Joeri

Verstuurd vanaf mijn SM-N910F met Tapatalk
jgiannakas
Posts: 183
Joined: Sat 02. Jan 2016 12:17:50

Joeri_Plees wrote:
jgiannakas wrote:Yeap you shouldn't need any revo mix
Thanks for the tip man that's works great! I only have tail wag now... And before not :/

Best regards Joeri

Verstuurd vanaf mijn SM-N910F met Tapatalk
Drop your tail gain. Also what is your rudder delay value? What pirouette consistency did you end up with?
User avatar
Joeri_Plees
Posts: 28
Joined: Tue 13. Oct 2015 22:29:39

I go to the field tomorrow hopefully and test it with lower tail gain.. And let you now the value of the consistency

Verstuurd vanaf mijn SM-N910F met Tapatalk
jgiannakas
Posts: 183
Joined: Sat 02. Jan 2016 12:17:50

Joeri_Plees wrote:I go to the field tomorrow hopefully and test it with lower tail gain.. And let you now the value of the consistency

Verstuurd vanaf mijn SM-N910F met Tapatalk
Thanks! Ive noticed that now that I've setup my governor to hold rpm more aggressively I have a minor kick when doing pitch pumps. Running 175 piro consistency on my 450L. Possibly need to up even more on my side or add 1 or 2 points of revo mix. Will be trying it at the field next time as well
velocity90
Posts: 252
Joined: Sun 26. Oct 2014 9:53:53

You will always get a small kick with agressive govs. Tune it out with revo too much and other things become worse. Side tick tocs to name one.
-TT E700 V2-Spirit Pro-mks950-980-Kontronik Kosmik 160 HV -Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+ Spirit Pro
Post Reply