rudder end points in wizard

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
bill rob
Posts: 39
Joined: Wed 16. Mar 2016 10:18:20

Hi,in the wizard I cant highlight the rudder end point box so I have no rudder movement,any idea what Ive done wrong?
Top
User avatar
Coco66
Posts: 433
Joined: Sun 26. Jul 2015 8:17:50
Location: Madrid, Spain / Torino, Italy

Most probably you are not in Bank 0...
Oxy 2 ♦ X-Vert ♦ Warp 360 ♦ Blade 450X ♦ Blade 450X Nightflyer ♦ Goblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQX ♦ LadyMQX ♦ nano QX ♦ nano QX FPV ♦ Inductrix ♦ DX8 G1
Top
Adrian
Posts: 204
Joined: Thu 08. Oct 2015 14:43:12
Location: Switzerland

You have to select box and than move the sliders, TX signal is deactivated during limit setting.
Oxy4max SpiritPro + HW // SOXOS 550, SpiritPro, HW120A V4, 920KV // SOXOS 600, SpiritPro, HW160A, Pyro650 // SOXOS Strike7, SpiritPro, HW160A, Pyro750 // Skywing Spirit Aero // FrSky Horus X10S + Taranis X7 /
Top
Post Reply

Return to “Support”