Bt module stopped working

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
velocity90
Posts: 252
Joined: Sun 26. Oct 2014 9:53:53

Hi,

I tried to use the bt module on my second spirit. Bluetooth finds the Spirit but if I connect with the software it says it can't find spirit data. Are the dongles protected to only work with one unit? Strange thing is it stopped working on my first unit as well.
-TT E700 V2-Spirit Pro-mks950-980-Kontronik Kosmik 160 HV -Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+ Spirit Pro
Top
velocity90
Posts: 252
Joined: Sun 26. Oct 2014 9:53:53

And a quick question, is the sys port ground shared, thus can it be used for ground of a rpm sensor?
-TT E700 V2-Spirit Pro-mks950-980-Kontronik Kosmik 160 HV -Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+ Spirit Pro
Top
velocity90
Posts: 252
Joined: Sun 26. Oct 2014 9:53:53

ImageImage
-TT E700 V2-Spirit Pro-mks950-980-Kontronik Kosmik 160 HV -Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+ Spirit Pro
Top
User avatar
Coco66
Posts: 433
Joined: Sun 26. Jul 2015 8:17:50
Location: Madrid, Spain / Torino, Italy

Did you check if the plug in then SYS port is plugged in correctly, or is it reversed? Happened to me.
Oxy 2 ♦ X-Vert ♦ Warp 360 ♦ Blade 450X ♦ Blade 450X Nightflyer ♦ Goblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQX ♦ LadyMQX ♦ nano QX ♦ nano QX FPV ♦ Inductrix ♦ DX8 G1
Top
velocity90
Posts: 252
Joined: Sun 26. Oct 2014 9:53:53

It's correct, tried numberous times :(
-TT E700 V2-Spirit Pro-mks950-980-Kontronik Kosmik 160 HV -Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+ Spirit Pro
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

I guess that you are powering the module from a different power source than the unit.
This can be reason for described behavior. You have to also connect grounds between these sources.
Spirit System developer
Top
velocity90
Posts: 252
Joined: Sun 26. Oct 2014 9:53:53

Connected to sys and power from ch0, all my helis are powered by 1 bec
-TT E700 V2-Spirit Pro-mks950-980-Kontronik Kosmik 160 HV -Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+ Spirit Pro
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Thanks for the info.
Are you sure that the SYS cable is oriented correctly?
Do you remember if there was some update before the issue occured for the first time?
Spirit System developer
Top
velocity90
Posts: 252
Joined: Sun 26. Oct 2014 9:53:53

Of the software you mean?
-TT E700 V2-Spirit Pro-mks950-980-Kontronik Kosmik 160 HV -Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+ Spirit Pro
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Yes - android app.
Spirit System developer
Top
Post Reply

Return to “Support”