Hi there!
Using my Jeti DC-14 I can switch between all modes of my Spirit Pro except 'Coaxial'. For 'Coaxial', I must use the software.
Is this correct or did I miss something in the setting up of either my DC-14 or the Spirit Pro software?
Mode Switching
Hi,
you have to download the latest Spirit.bin file from our web pages and place in the Devices directory on your SD Card.
Then it should work.
you have to download the latest Spirit.bin file from our web pages and place in the Devices directory on your SD Card.
Then it should work.
Spirit System developer
-
Heliman550
- Posts: 69
- Joined: Sat 21. Nov 2015 14:07:14
OK, I'll do it again. My most recent version is 2.0.0, what's the latest?
Regards,
Heliman550
Heliman550
The latest version is 2.2.0.
You always have to download the same version which is provided with the firmware update of the unit.
If there is old file, it might not work correctly and also there will be missing features.
You can find everything in our web page/Download section.
You always have to download the same version which is provided with the firmware update of the unit.
If there is old file, it might not work correctly and also there will be missing features.
You can find everything in our web page/Download section.
Spirit System developer