First post

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
scrambled
Posts: 85
Joined: Sat 11. Apr 2015 18:07:33

Can't resist to put the first post on the Aero forum. :mrgreen:
Great work Spirit team!

To add a question, I see there is a new Aero FBL unit on preorder.
What is the difference with the regular red Spirit? Only the new Aero label?

Can we load the Aero firmware on the "regular" Spirits as we now use for our helicopters?
Top
ZeXx86
Site Admin
Posts: 12750
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Thank you very much!

It has different voltage stabilisation system and a difference in the port wiring.
Rest is identical with the normal Spirit units. The main difference is lower price since the tests that the Aero units must pass are not so demanding. Thus there is higher rate of a good units that can pass all the tests which mean lowered manufacturing cost.
So the Aero units are designed for the aircrafts.

Yes, you can load the Aero firmware to any Spirit unit you wish.
Spirit System developer
Top
User avatar
Coco66
Posts: 433
Joined: Sun 26. Jul 2015 8:17:50
Location: Madrid, Spain / Torino, Italy

Hope you CAN'T load the Heli FW on a Spirit Aero unit...
Oxy 2 ♦ X-Vert ♦ Warp 360 ♦ Blade 450X ♦ Blade 450X Nightflyer ♦ Goblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQX ♦ LadyMQX ♦ nano QX ♦ nano QX FPV ♦ Inductrix ♦ DX8 G1
Top
ZeXx86
Site Admin
Posts: 12750
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Yes, this is not possible normally.
But there is still possibility to upgrade the HW on demand so then the unit can be used to any purpose.
Spirit System developer
Top
Post Reply

Return to “Aero - Support”