Stabilization modes

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
tfmcnellist
Posts: 53
Joined: Thu 28. Aug 2014 20:05:23

I am looking at the Aero for a beginner. Information is about the stabilization modes is hard to find. Is there an option that brings the plane back to level (self level) when you let go or center the sticks?
ZeXx86
Site Admin
Posts: 12750
Joined: Mon 29. Apr 2013 16:06:44
Contact:

Hello,

you can find full description of the stabilisation modes in our manual.

Answer for your question is: yes.

Please see these pages:
http://aero-man.spirit-system.com/index ... on_(Normal)
http://aero-man.spirit-system.com/index ... tion_(Acro)
Spirit System developer
Tfmcnellis
Posts: 56
Joined: Tue 15. Sep 2015 2:49:32

The two links provided do not have any text.
ZeXx86
Site Admin
Posts: 12750
Joined: Mon 29. Apr 2013 16:06:44
Contact:

This is because web browser is not taking the last character. You have to add ")" to the URL.
Spirit System developer
RidgeMan
Posts: 31
Joined: Fri 26. May 2017 0:58:57
Location: St.Louis, Missouri USA

What would be the gain setting for these modes... and is it a + or - value on a Tx that uses the -100 > +100



ZeXx86 wrote:Hello,

you can find full description of the stabilisation modes in our manual.

Answer for your question is: yes.

Please see these pages:
http://aero-man.spirit-system.com/index ... on_(Normal)
http://aero-man.spirit-system.com/index ... tion_(Acro)
ZeXx86
Site Admin
Posts: 12750
Joined: Mon 29. Apr 2013 16:06:44
Contact:

For stabilisation mode it is any negative value. For normal flying it is any positive value of the Global Gain.
So it does not matter if it is -100, -60, -10 it will activate the stabilisation (if selected Stabi/Function is selected as the Stabilisation).
But what the actual value is affecting is (whether it is positive or negative) how much it will be compensating.
So further from 0% the value is, the bigger compensation by the unit.
Spirit System developer
Post Reply