Hi,
I'm using a Spektrum SPMAR9020 nine channel receiver to send 5 channels (PWM) to a standard Spirit gyro. If I connect the SRXL pin on the 9020 receiver to the RUD pin on the Spirit (and select SRXL receiver type in software) how many of the 9 channels of the receiver will be available? Will it still only be 5 channels?
If it makes a difference my transmitter is a 12 channel Walkera DEVO 12s w/deviation firmware. NOT a Spektrum TX.
SRXL channels
Hi,
with SRXL connection it should be all the channels that transmitter offer. But in case of Walkera I am not confident how it will work.
You can get also AR7700 which is smaller but also offer SRXL connection.
with SRXL connection it should be all the channels that transmitter offer. But in case of Walkera I am not confident how it will work.
You can get also AR7700 which is smaller but also offer SRXL connection.
Spirit System developer
-
George Baker
- Posts: 81
- Joined: Thu 12. May 2016 0:20:26
Thank you for the answer. I will check with the TX firmware developer or I may just try it and see what happens. Would be nice to have more than 5 channels although I haven't really needed to adjust my rudder gain which I have to do in the software instead of the TX.