Spirit Areo - Funktion 3D Hold

[threeDfreak]

Hello,

is it possible that we get a Funktion Mode where the Spirit Aero keep the angle of rotation in every axis? In this Mode the Spirit Aero try to hold the angle of the plane. For example you can fly torque figures without remote control inputs.

For example other FBL Systems like Bavarian Demon Cortex Pro have that funktion. The Pilot must fly the plane in the torque figure and then the plane lock this position. Then the FBL System hold that figure (angle of rotation axis).

LG Florian

[ZeXx86]

Hello,

Spirit Aero has support for maintaining angle for all 3 axes - it is called Stabilisation where the plane is leveled to horizotal position without inputs or to selected angle with Rescue mode.
I am not sure if it is same as 3D Hold function. But I think that if not, it would be easy to add it.

Also in Head Lock mode it is mantaining the angle - it is holding the last direction that pilot will put with sticks.

[threeDfreak]

https://www.youtube.com/watch?v=snX2pMZlDl0

what i mean is shown at the end of the first minute in this Youtube Video. At this System the Mode is called Attitude Heading Hold.

In this Mode you can fly easy figures like this https://www.facebook.com/jonathan.bossion/videos/1535496346518915/

[ZeXx86]

Yes, we can add this function in next release.

[threeDfreak]

really

wow, that would be absolut awesome. Really thank you

I have searched really many other FBL Systems for Planes. There is no other System how have the Stabilation Mode with Wing Horizon Level AND this "3D Mode". The other Systems have Stabilation Mode with Wing Horizon Level OR the "3D Mode".

When you add this to the Spirit Aero your System is the only System on Market who can do both

Then you can fly really risky figures easy and when you get in trouble you can switch to Wing Horizon Level Mode.

[threeDfreak]

i have found a really good video that shows what i mean. That mode is not only for torque figures. It is also really easy to fly in knife flight figures.

That Mode is working only with aerobatic flight models like a Extra 330 and so on. The Sensor Gain is in that mode much more higher than in normal flight mode.

https://www.youtube.com/watch?v=zfed_WYJ9p8

[ZeXx86]

Thank you very much.
For sure we will add this function as soon as possible.

[donskills]

Posted about this a while ago! This I am really waiting for!!