Connection Spirit Pro Optipower Ultraguard with BEC Guard

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
rolandk
Posts: 49
Joined: Tue 03. Oct 2017 12:14:24

Hello all together,

I intend to use an Optipower Ultraguard with 2 BEC Guards for a Backup solution in a TREX 700L V2 build up with a Spirit Pro FBL.
I have only a question to the connections.
I want to connect the two power cables fromthen ESC with the the two BEC Guards and the BEC Guards then with AUX1 and AUX2 on the Spirit (AUX1 is also connected with throttle signal from the ESC over the BEC Guard).
The Ultraguard Unit with the buffer Akku I want to connect with CH0 on the spirit(on + and -).

Is this a possible way of connection?

Thanks a lot for all answers.

With best regards

Roland
Top
mb-1953
Posts: 98
Joined: Tue 03. Mar 2015 15:55:50

you can plug in the bec guards seperately from the bec of the esc. That is how i do mine. They can be plugged into any port except the sys and ele/pit/ail.
Top
Post Reply

Return to “Support”