Alt hold setup, vertical gain adjustment

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
tabbie
Posts: 73
Joined: Tue 14. Aug 2018 9:11:02

Hi all,

I have setup my T-rex 600 so far. It flies very ok, Pos hold is okay but alt hold is a mess.

Starting with vertical gain 100 gives vertical climb fast about 10m and then 10 m descending rapidly.
vertical gain 110 gives very high frequency ups and downs about 1m with 2hz frequency.
vertical gain 105 gives lower frequency ups and downs about 2m and 0,5hz.

Shall I try different setups between 100 and 105 or 105 to 110? Or much higher?

Appreciate your answers.
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:

Hi,

I recommend to set value around 75.
This could help a lot.
Spirit System developer
dub
Posts: 34
Joined: Thu 19. Jul 2018 13:54:36
Location: Litoměřice

Trápil jsem se se stejným problémem jako pisatel dotazu . Nastavil jsem na mém T-Rexu 500X 70% zisku a je to naprostý luxus. :D
Logo 700,T-Rex 500X Dominator, Spirit PRO, GeoLink, Jeti DC-24
tabbie
Posts: 73
Joined: Tue 14. Aug 2018 9:11:02

Hä?
tabbie
Posts: 73
Joined: Tue 14. Aug 2018 9:11:02

I have tested my T-rex 600 now and finally set to "76". This was the best compromise. Thank you
Post Reply