Hi.
I have the problem that not all displays of the Kontronik-Sensor are filled. E.g. BEC Voltage is emtpy and PWM is fixed to 119%. As I am using an old Jive and the Sensor is set to slot 8 as described in the manual. My transmitter is a T14SG with firmware V8. Any ideas what could cause this behaviour?
Cheers,
Nils
Telemetry Jive with Fasstest - not all values transmitted
Ah, answered some questions myself with second read of this wiki article. http://manual.spirit-system.com/index.p ... _Telemetry
Would be nice to output all of the ESC sensor data and add a second sensor for vibration level and PWM. Personally I like to know BEC current to have an eye on the usage of the BEC and if it still has enough power to support the Servos. And BEC Voltage is missing (but measured well by receiver).
Cheers
Nils
Would be nice to output all of the ESC sensor data and add a second sensor for vibration level and PWM. Personally I like to know BEC current to have an eye on the usage of the BEC and if it still has enough power to support the Servos. And BEC Voltage is missing (but measured well by receiver).
Cheers
Nils