Castle HV 80 does not run high

[caravan-rau]

Hallo
Today I got your Telem CC cable
cable the same negative result
I have worked without resistance and now
the result is positive
The telemetry data is displayed irregularly. Alternately correct and incorrect
Is that normal?

[ZeXx86]

Hello,

unfortunately this is not normal.
It should not work at all without the resistor.

Can you let me know which Castle ESC model is it exactly?

[caravan-rau]

ICE2HV80 I installed

[ZeXx86]

Oh, unfortunately this model is not supported officially.
If I am not wrong some people had success with it, but sadly there are few differences from Edge/Talon ESCs.

Please see this table:
http://manual.spirit-system.com/index.p ... ted_models

It is possible that with a different resistance values it could be fixed. I would try for example approx. 20 KOhm.

[caravan-rau]

Thanks, I will try with 20 kohm

[caravan-rau]

with a resistance of 20 kohm, the telemetry indicator is steady, but the regulator does not run stably
I have now installed the correct regulator and everything is good
problem solved
Thanks