I am using a Spektrum IX12 and I have never used the stabilization and rescue together. I only used Head-lock + rescue activated by a momentary switch.
I need help setting up the TX and software so I can switch between stabilization on and stabilization off then be able to use my momentary switch for rescue for either mode. I have another thread that explains what I am currently trying and what the results are. I am using a mix for the rescue. Is there a better way to do this?
Here is the other thread:
http://spirit-system.com/phpBB3/viewtop ... =20&t=3348
SOLVED!!!! x12 stabilization and rescue
-
Tfmcnellis
- Posts: 56
- Joined: Tue 15. Sep 2015 2:49:32
Last edited by Tfmcnellis on Sat 22. Jun 2019 1:08:24, edited 1 time in total.
-
Tfmcnellis
- Posts: 56
- Joined: Tue 15. Sep 2015 2:49:32
SOLVED!!!!!!!
I used a couple AND OR mixes. Now I get the same value of -60 during Rescue for both head-lock and stabilization.
I will go out and fly tomorrow.
Thanks for all the help.
I used a couple AND OR mixes. Now I get the same value of -60 during Rescue for both head-lock and stabilization.
I will go out and fly tomorrow.
Thanks for all the help.