Trex 150

[tomsl]

with 40% Rudder Gain you can fly but it swings in both directions 20mm.

does it make sense to give you my settings?

Thank you for your help

[ZeXx86]

Yes please. Send your settings. You can attach it here.

[tomsl]

Hi
here my settings

Thank you very, very, very much

[tomsl]

Hello what's happening??????

[ZeXx86]

Hello,

here is the special firmware for you:
http://spirit-system.com/dl/fw//spirit-fw-2.6.5.4df

You can download and flash it.

After flashing Pirouette Consistency will behave as if the values are divided by half.
So value 160 will work as 80.

For the first try I recommend to set value 180 now.
I hope it will help you.

[tomsl]

Hello

Now that's what I call customer service - awesome awesome awesome awesome!!!
I`ll tell everyone about my experience with Spirit System in my club.
I've already made a few test flights. The problem is almost gone, all I have to do is play with the setting a bit more.

Thank you!

[caven]

Can you send photo how you install uspirit?

Thanks

[ZeXx86]

You are welcome! New official Spirit firmware will be prepared for this. So that you will be able to set much lower values of the Pirouette Consistency.

[tomsl]

sorry i only saw it now
do you still need photos?