3.0.1 any problems??

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
Mikej
Posts: 63
Joined: Thu 28. Aug 2014 17:01:01

I'm about to fit my Spirit (original 2014 model) onto my OXY 3, I was going to do it this weekend and load up the new firmware however reading about the issues with 3.0.0 I am reticent.

Does 3.0.1 appear to be stable? As mine is an earlier version it sounds like it is more likely to have an issue...

Cheers,
Mike.
Top
User avatar
Genesis
Posts: 59
Joined: Thu 19. Jan 2017 2:17:34
Location: Alberta, Canada

Mikej wrote:I'm about to fit my Spirit (original 2014 model) onto my OXY 3, I was going to do it this weekend and load up the new firmware however reading about the issues with 3.0.0 I am reticent.

Does 3.0.1 appear to be stable? As mine is an earlier version it sounds like it is more likely to have an issue...

Cheers,
Mike.
Hi Mike,

I believe Tomas has re-posted 2.8.0 as there have been some issues with 3.0.0 and 3.0.1 which he and his team are working and will be doing extensive test flights to be sure it will work properly on all models.
ZeXx86 wrote:Unfortunately version 3.0 is temporarily unavailable. We have to make more testing to be absolutely sure everything will work well on all helicopters.

For this reason version 2.8 is available for download again.

Thank you for understading.
I think mentioned we should see a new updated version in the next few days or coming weeks when he is satisfied it is working properly.

BR,
Kevin
Blade 230 S / 230 S NF / 450X / 500X / 550X ~ Trex 470LM ~ OXY 3-285 / OXY 4-325 / OXY 4 MAX ~ Spektrum DX9 BE / DX6 Gen 2 ~ Spirit FBL
_______________________________________________
Team OXY Helicopter - Lynx Heli Innovations Field Rep
Top
Mikej
Posts: 63
Joined: Thu 28. Aug 2014 17:01:01

Thanks Kevin - I didn't realise that 3.0.1 was problematical as well, good job I waited 8-)
Top
Post Reply

Return to “Support”