Hello
does Geolink and Jive 80+ Hv telemetry work at the same time on the Spirit RS?
greetings heli
Geolink and Jive 80+ Hv telemetry work at the same time ?
Hello,
yes.
yes.
Spirit System developer
Hello
I connected a Jive 80+ HV to the Spirit RS. Unfortunately the speed displayed is too high, 1516U / min ds Spirit, the Unisens 1347u / min
The motor SK3 T 700 400u / v has 10 motors poles (10 magnets in the bell) but 12 poles on the stator.
What do I have to enter, 5 or 6?
greetings heli
I connected a Jive 80+ HV to the Spirit RS. Unfortunately the speed displayed is too high, 1516U / min ds Spirit, the Unisens 1347u / min
The motor SK3 T 700 400u / v has 10 motors poles (10 magnets in the bell) but 12 poles on the stator.
What do I have to enter, 5 or 6?
greetings heli
Hello
10 Magnets = 5
10 Magnets = 5
official hacker distributor USA
www.hackermotors.us
www.hackermotors.us
Hello,
tried that out today.
The helicopter turned at 1350 rpm (measured with an external tachometer).
The Unisens showed 1342 rpm, the Spirit RS showed 1514 rpm.
In the spirit is registered:
Sensor divider 5
Gear ratio 9.3 (normal T-Rex 700 main gear 112T, pinion 12T)
Why is that so imprecise?
The unisens decreases the speed on the rotor shaft.
Jeti DS-12 , Spirit RS
Greetings heli
tried that out today.
The helicopter turned at 1350 rpm (measured with an external tachometer).
The Unisens showed 1342 rpm, the Spirit RS showed 1514 rpm.
In the spirit is registered:
Sensor divider 5
Gear ratio 9.3 (normal T-Rex 700 main gear 112T, pinion 12T)
Why is that so imprecise?
The unisens decreases the speed on the rotor shaft.
Jeti DS-12 , Spirit RS
Greetings heli
- Attachments
-
- 10-23-02.log
- (1.11 MiB) Downloaded 20 times