Spirit Governor

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
gerry
Posts: 234
Joined: Fri 26. Aug 2016 6:51:10
Location: Austria

I use the Spirit RS.
Everything actually works.
I only noticed that when checking the RPM signal in the PC software, the red / green light does not glow permanently, but it flickers in short intervals. Is that okay or should it glow permanently? I have frequency on 200Hz set, signal filter to default.
Greetings Gernot
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

It is OK, it is rather only to show a slow revolutions to check the sensor itself.
Spirit System developer
Top
gerry
Posts: 234
Joined: Fri 26. Aug 2016 6:51:10
Location: Austria

Thanks for the quick answer, Tomas!
Greetings Gernot
Top
Post Reply

Return to “Support”