Purchase info

[BJD]

Probably a question for Tomaz! If anybody else can answer please feel free
I am going to purchase a DS-12 Spirit, RS Spirt unit and a Geolink. I am wondering do I need Telem CC Cable in order to get the castle creation ESC to work with telemetry or does it work without it. Also if I add all the units to my cart and pay for them are they shipped seperately or all at once as the geolink and Telem CC Cable are not in stock.
On arrival in Australia does the purchase attract any import duty?
Is the 900mhz backup receiver I will need specific to Australia that I will purchase in Aus compatable with the RS unit?
Can additional modules be purchased at a later date after registration of the radio with JETI?
If I was to purchase all of the modules at once will any of them overwrite the ones it comes with?
I want mainly to get all the voice commands the 900mhz backup, and the vibration modules.
Is there anywhere that details exactly with regards to installed modules (i.e. what they do in detail not just the name of the module) that come standard on the Spirit radio out of the box as I am only familiar with Futaba and Spectrum

[ZeXx86]

Hello,

yes, you will need Telem CC for Castle telemetry. Wiring is identical with other Spirit units.
All shipped together. We are producing everything each day, so there might be only 1-3 days delay when something is out of stock.
Yes, usually there is customs import fee. With Express carrier it is happening usually always, but is fast too.

Any JETI peripheral is compatible with Spirit RS. But in the most cases any backup receiver is not needed.

Here you can find details about modules. https://swshop.jetimodel.com/transmitte ... x-mm-4.htm

Please note Spirit Edition have already installed modules such as 12 and 16 channel support, Flight Modes, Logging Plots.
So you can already fully utilize Spirit units with it out of the box.

[BJD]

Hello,

yes, you will need Telem CC for Castle telemetry. Wiring is identical with other Spirit units.
All shipped together. We are producing everything each day, so there might be only 1-3 days delay when something is out of stock.
Yes, usually there is customs import fee. With Express carrier it is happening usually always, but is fast too.

Any JETI peripheral is compatible with Spirit RS. But in the most cases any backup receiver is not needed.

Here you can find details about modules. https://swshop.jetimodel.com/transmitte ... x-mm-4.htm

Please note Spirit Edition have already installed modules such as 12 and 16 channel support, Flight Modes, Logging Plots.
So you can already fully utilize Spirit units with it out of the box.

Hello,

yes, you will need Telem CC for Castle telemetry. Wiring is identical with other Spirit units.
All shipped together. We are producing everything each day, so there might be only 1-3 days delay when something is out of stock.
Yes, usually there is customs import fee. With Express carrier it is happening usually always, but is fast too.

Any JETI peripheral is compatible with Spirit RS. But in the most cases any backup receiver is not needed.

Here you can find details about modules. https://swshop.jetimodel.com/transmitte ... x-mm-4.htm

Please note Spirit Edition have already installed modules such as 12 and 16 channel support, Flight Modes, Logging Plots.
So you can already fully utilize Spirit units with it out of the box.

Hello,

yes, you will need Telem CC for Castle telemetry. Wiring is identical with other Spirit units.
All shipped together. We are producing everything each day, so there might be only 1-3 days delay when something is out of stock.
Yes, usually there is customs import fee. With Express carrier it is happening usually always, but is fast too.

Any JETI peripheral is compatible with Spirit RS. But in the most cases any backup receiver is not needed.

Here you can find details about modules. https://swshop.jetimodel.com/transmitte ... x-mm-4.htm

Please note Spirit Edition have already installed modules such as 12 and 16 channel support, Flight Modes, Logging Plots.
So you can already fully utilize Spirit units with it out of the box.

[BJD]

Hello,

yes, you will need Telem CC for Castle telemetry. Wiring is identical with other Spirit units.
All shipped together. We are producing everything each day, so there might be only 1-3 days delay when something is out of stock.
Yes, usually there is customs import fee. With Express carrier it is happening usually always, but is fast too.

Any JETI peripheral is compatible with Spirit RS. But in the most cases any backup receiver is not needed.

Here you can find details about modules. https://swshop.jetimodel.com/transmitte ... x-mm-4.htm

Please note Spirit Edition have already installed modules such as 12 and 16 channel support, Flight Modes, Logging Plots.
So you can already fully utilize Spirit units with it out of the box.

Hello,

yes, you will need Telem CC for Castle telemetry. Wiring is identical with other Spirit units.
All shipped together. We are producing everything each day, so there might be only 1-3 days delay when something is out of stock.
Yes, usually there is customs import fee. With Express carrier it is happening usually always, but is fast too.

Any JETI peripheral is compatible with Spirit RS. But in the most cases any backup receiver is not needed.

Here you can find details about modules. https://swshop.jetimodel.com/transmitte ... x-mm-4.htm

Please note Spirit Edition have already installed modules such as 12 and 16 channel support, Flight Modes, Logging Plots.
So you can already fully utilize Spirit units with it out of the box.

Hello,

yes, you will need Telem CC for Castle telemetry. Wiring is identical with other Spirit units.
All shipped together. We are producing everything each day, so there might be only 1-3 days delay when something is out of stock.
Yes, usually there is customs import fee. With Express carrier it is happening usually always, but is fast too.

Any JETI peripheral is compatible with Spirit RS. But in the most cases any backup receiver is not needed.

Here you can find details about modules. https://swshop.jetimodel.com/transmitte ... x-mm-4.htm

Please note Spirit Edition have already installed modules such as 12 and 16 channel support, Flight Modes, Logging Plots.
So you can already fully utilize Spirit units with it out of the box.