6 Degree Tuning Problem

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
grant22
Posts: 21
Joined: Fri 13. Sep 2019 1:20:17

I’ve set up several Spirits (mine and friends) and I’m having an issue with 6 degree tuning for the first time.

I cannot get more than 5.2. I keep increasing the value and it just stops increasing in degrees around 110 value.

My rates are 100, swash is level, and I’ve even raising/lowering the swash a little and zeroing the blades at neutral stick.

Nothing seems to work even after looking at the mechanical side of things. Please help (Blade 330)
Top
Jay23
Posts: 37
Joined: Fri 01. Mar 2019 14:54:21

Hi, I had this same problem when setting up a black nitro using gwd servos, turned out 1 servo wasn't centering correctly, it sent the whole setup out of whack, I had to connect a separate servo centerer to get it right even though the spirit software centered everything initially.

Hope this helps
Top
Post Reply

Return to “Support”