Delay setting for xlpower rudder servo

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
Jay23
Posts: 37
Joined: Fri 01. Mar 2019 14:54:21

As above what delay setting should the xlpower DS747RS 760μs Rudder Servo be set too as it's not listed in the servo list on the spirit website.

Thanks
Top
Gtamas
Posts: 109
Joined: Tue 17. Mar 2015 22:07:02

Hi!

I'm using the same servo in XL520, with 0 delay. It is working very well.
Top
Kluftinger
Posts: 101
Joined: Tue 25. Jul 2017 20:33:40
Location: Southern Bavaria

So far I have for all high quality tail servos the "rudder delay" at 0 - 2.

Only for Align tail servos I had to use higher values: Align DS455HV = 8, Align DS 535 HV = 4
Top
gjhernandez
Posts: 37
Joined: Sun 11. Oct 2020 21:48:21

I use 4 and works perfect. But according to the manual it seems it should be 0
Top
Post Reply

Return to “Support”