[SOLVED] Problems with the tail it swings very very strong

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
vellodoro
Posts: 4
Joined: Sun 05. Sep 2021 10:18:09

Hi, I have a problem with this gyro and Goblin RAW, when the tail spins disadvantage torque (clockwise) it swings very very strong, I tried to decrease the tail sensitivity but the problem persist.
Thanks so much
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Hi,

can you please share your settings file?
What is your tail servo?
Spirit System developer
Top
vellodoro
Posts: 4
Joined: Sun 05. Sep 2021 10:18:09

ZeXx86 wrote:Hi,

can you please share your settings file?
What is your tail servo?
The tail servo is KST MS805, ESC is the Hobbywing 200A v4.1 setted by default.
at 2000 rpm ok 34 rud sensitivity
at 2300 rpm is ok 12-10 rud sensitivity
is it normal?
Thanks so much.
Attachments
Sab Raw.4ds
(255 Bytes) Downloaded 53 times
Top
vellodoro
Posts: 4
Joined: Sun 05. Sep 2021 10:18:09

Thanks for the support (non-existent) I solved alone!
vellodoro wrote:
ZeXx86 wrote:Hi,

can you please share your settings file?
What is your tail servo?
The tail servo is KST MS805, ESC is the Hobbywing 200A v4.1 setted by default.
at 2000 rpm ok 34 rud sensitivity
at 2300 rpm is ok 12-10 rud sensitivity
is it normal?
Thanks so much.
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Hello,

your settings looks good. But for this servo changing servo arm to a shorter could help.
Then readjusting rudder end points will be needed.
Spirit System developer
Top
User avatar
urgno
Posts: 274
Joined: Tue 21. Aug 2018 13:05:23
Contact:
Contact urgno

vellodoro wrote:Thanks for the support (non-existent) I solved alone!
maybe, instead of ranting,
you can share the solution for the benefit of all other forum users :-)
Top
buttles
Posts: 156
Joined: Tue 16. Jun 2015 14:37:10

urgno wrote:
vellodoro wrote:Thanks for the support (non-existent) I solved alone!
maybe, instead of ranting,
you can share the solution for the benefit of all other forum users :-)
+1. Four posts in and he's up in arms already. Maybe an apology from Tomas for taking less than two days to provide his solution :roll: :)
Top
vellodoro
Posts: 4
Joined: Sun 05. Sep 2021 10:18:09

I changed the Rudder Common Gain to 1.00 x, although for a Heli 700 it was recommended 1.3 or 1.5 and the problem disappeared. The problem occurred only at 2300 rpm, at 2000 rpm was ok

The FlyBarless Spirit for me is one of the best systems on the market.
Top
buttles
Posts: 156
Joined: Tue 16. Jun 2015 14:37:10

I suspect the crazy headspeed of the RAW may have something to do with it. The Spirit gain multiplier for a 700 size Goblin heli is probably based in a headspeed of 1900/2000
Top
User avatar
urgno
Posts: 274
Joined: Tue 21. Aug 2018 13:05:23
Contact:
Contact urgno

maybe in the next version there will be a template also for the raw
Top
Post Reply

Return to “Support”