Roban 800 Scale
-
KaltBaron20
- Posts: 4
- Joined: Mon 25. Oct 2021 10:08:30
Hello from Australia. I am currently setting up the Spirit 2 using a Futaba S-Bus system....I am unable to achieve the 6 degrees in the geometric stage, the servos stop responding when I reach a setting limit of 124. Any help appreciated. Tim
Hello,
maybe you have to not configured Cyclic Ring limit in the Limits tab properly.
Please increase the limit to the point that mechanics allow. So that you can achieve at least +/- 10° angle for the Cyclic pitch.
maybe you have to not configured Cyclic Ring limit in the Limits tab properly.
Please increase the limit to the point that mechanics allow. So that you can achieve at least +/- 10° angle for the Cyclic pitch.
Spirit System developer
Hello Tim,
I am looking to get the EC-135 soon and I am also using the Spirit (Spirit pro).
Can you send me your settings so I can see which one you are flying with.
I am primarily interested in using a setting that already works quite well. Fine tuning will be done of course.
-Gerald
I am looking to get the EC-135 soon and I am also using the Spirit (Spirit pro).
Can you send me your settings so I can see which one you are flying with.
I am primarily interested in using a setting that already works quite well. Fine tuning will be done of course.
-Gerald