[SOLVED] 3.4.1 + GeolinkV2 + Return Altitude not saved

[sacha]

Hello

System: Spirit GTR (V3.4.1) + Geolink V2 (V1.3)

When i set the "Return Altitude" to 31m as an example. It will not be saved in the unit.
(Autosave or Manual Save)

After a power cycle the value is back to: 0m

Thanks for your help

Sacha

[ZeXx86]

Hello,

maybe you have old integration files and changing it from there.

If using the latest Spirit Settings 3.4.1 and the latest firmware 3.4.1 it should be fine.
It is very important to have both firmware and software updated.

[sacha]

Oh no. My fault. I had 3.4.0 on the GTR.
Sorry for that.
[SOLVED]

Best regards

Sacha