Telemetry Values Kontronik Jive Pro with GTR

In case you do not know something or you are not sure, here is the right place for your question.
Post Reply
tahuata
Posts: 2
Joined: Sat 21. Jan 2023 22:25:37

Hello,
connecting a Jive Pro 120+ to the GTR Unit with the Master Cable set to THR and the Slave Cable set to E1 (configured to EX Bus) I get all Spirit Telemetry Values on my DC-24 Transmitter but they all show 0, except the Altitude. Here the readout shows correct Values. Do I need the "Spirit Telem Kontronik V2 Cable" to connect the Jive Pro to the SAT1 Port or is there another way without that Cable ?

Thanks for Support...

Heiko
Top
ZeXx86
Site Admin
Posts: 12836
Joined: Mon 29. Apr 2013 16:06:44
Contact:
Contact ZeXx86

Yes, the cable is needed.
Please see our guide: https://manual.spirit-system.com/index. ... _Telemetry
Other way is to buy Kontronik JETI TelMe module which is few times more expensive.
Spirit System developer
Top
Post Reply

Return to “Support”