Good morning,
I have a Spektrum NX10 radio and I have installed on the helicopter a SPM4651T SRLX2 receiver connected on RUD-ALL to the Spirit 2 and Geolink V2 connected on the SAT2 port.
It all works.
To increase security I would like to add a DSMX satellite as backup of the SPM4651T receiver.
Is it possible to connect the DSMX satellite to Spirit 2 ?
In case, do I have to connect to the SAT1 port or do I have to use the SAT2 port ?
If it is not possible to connect the DSMX satellite, are there other solutions?
Thank you.
SRLX2 and Spirit 2 - Connection
Hello,
additional DSMX Sat is not possible - but you can take an additional SLRX2 Sat as described there:
https://manual.spirit-system.com/index. ... y_receiver
But then you have no possibility for telemetry from the ESC if you are using Geolink V2 (sat2) -
Regards
additional DSMX Sat is not possible - but you can take an additional SLRX2 Sat as described there:
https://manual.spirit-system.com/index. ... y_receiver
But then you have no possibility for telemetry from the ESC if you are using Geolink V2 (sat2) -
Regards