AGF Servos

Pascal Feller · Fri 21. Apr 2023 8:34:28

Hello everyone. i have a new set of AGF servos, 3x A80BHX-H on swash and A80BHP-H on tail. the swash-servos runs direct after connect to the endpoints and then back to neutral.after that follows the normal initialization. that seems to happen only in this specific constellation: spirit unit and agf servos. i use a GTR with latest firmware (3.5.0) i never see something like that before. is this a problem for the servos?

Fri 21. Apr 2023 8:39:59

Hello,

we saw this behavior only with AGF servos. It is possible there is something required to program inside the servos.
Please ask manufacturer of the servo.

Habásek · Fri 21. Apr 2023 9:14:50

Pascal Feller wrote:Hello everyone. i have a new set of AGF servos, 3x A80BHX-H on swash and A80BHP-H on tail. the swash-servos runs direct after connect to the endpoints and then back to neutral.after that follows the normal initialization. that seems to happen only in this specific constellation: spirit unit and agf servos. i use a GTR with latest firmware (3.5.0) i never see something like that before. is this a problem for the servos?

https://www.agfrc.com/index.php?id=2550
AGFrc AGF-SPV3 USB program card used for AGFrc servo with ASS icon mark. Easy to use and DIY the parameter of the AGFrc servo. AGF-SP V3 is an upgraded version of the AGF-SP V2, it can use for our 1/5 large scale servo A280BHMW /A280BVSW, 4S high voltage servo A86BUMW , as well as helicopter servo A80BHM-H /A80BHN-H /A80BHX-H /A80BHP-H. What's more, all of our programmable servo with ASS icon mark, can click the "Narrow Band" function to be used as the Tail Servo.