Omp M4 Spirit 2

[Uplate]

I have a new M4 on the way. Plan is to install a Spirit 2 with Geolink 2. I bought the kit version with ESC and servos.

Anything special I should be aware of? Motor Poles?

Thanks for any insight.

[ZeXx86]

Hello,

there should be nothing special from other models except the motor settings.
But this can be all done in the ESC.

[Uplate]

Thank you! New GT on the way.

[MichaelT1960]

I have just installed a Spirit 2 with Geolink V2 on my OMP M4, using a Futaba T18szh transmitter.

Still programming for the Geolink but make sure you don't turn on Stabi + Acro mode because when you get to the ground - if you move the cyclic stick it will give you a surprise (still moves and may tip over you heli.

I ruined a set of blades (ends were scrapped) until I realized why (the swashplate doesn't return to normal unless you move your stick there).

Michael

[Uplate]

Thanks for the info.
With the Geolink installed is your CG way off?
Also regarding Stabi Acro I would think it should be used in flight and not on take off or landing.
Perhaps Coaxial might be better if you want Stabi for that?

[MichaelT1960]

What exactly is Coaxial stability?

Will check CG but I am using Pulse 2200 6S packs.

Still learning how to program the Geolink and Spirit 2.

Michael

[Uplate]

It's one of the many options under Stabi menu.
Good documentation in manual and app tool tips.