Cyclic pulls down to the right

You can write here about anything you want in regard to R/C.
Post Reply
limabean1
Posts: 13
Joined: Wed 09. Jun 2021 11:47:04

Hi all
Im having issues with a set up. Ive built a 450 out of parts. Mostly 450 pro parts but 215mg kst servos Spirit fbl and hobbywing 40amp v4 esc.
Everything is programmed, leveled, 0 pitch at 50% etc etc. The issue i have is that when it spools up, channel 3 servo pulls to the right and there is poor tail authority. I'm running Stabi scale with 60% neg in the gyro to make it active but it is not working that well when i am just moving the heli by hand to check its functioning.
Do you think it could be the spirit unit as its relatively old.
Any advice welcome.
Ta
Top
Post Reply

Return to “General discussion”