Spirit GTR / GeoLink V2 RTH height

You can write here about anything you want in regard to R/C.
Post Reply
p-51d
Posts: 18
Joined: Thu 01. Jul 2021 11:48:21

Good afternoon

setting the return height to 90m ( about high trees in the area ) the heli flies back to the lift off point ( mode 4 ).
As soon as the RTH is active the electronic of Spirit moves the TS and therefore the heli dives to about 30m height during the flight back.
As soon as the model is at the starting point it climbs up to the height stored in the Geolink setup RTH ?
Using different heights ( 75, 55, 45m ) results in the same behaviour.

Jeti DC-24 FW 4.0.0 / Spirit GTR FW 4.0.0 / GeoLink FW 1.4.1

Do you guys have similar effects ?

Thanks
Regards

Roland
Top
Post Reply

Return to “General discussion”