Warning if flat pack plugged

[bovi7]

Coming from Jeti, I’m new to Spirit Wave. I can’t figure out how to set an alarm for plugging in a battery that isn’t fully charged.
The alarm should activate when Motor Hold is on and the voltage is below a certain value. During flight, the alarm should remain silent.

[Mattes61]

Hello,
checking you battery before flight is much better then to check it by program - take some battery checker...they are not expensive -
That would be my recommendation for your safety.
BR

[ZeXx86]

Hello,

you can set Warning in Alarm menu for ESC - Battery Volage.
Then set voltage when it should call the alarm. Lastly you need to set activation during Power up.

This will check the battery when model is plugged in, not after.

[bovi7]

Thank you!