Hello,
I have some questions regarding the new Spirit 3 FBL. If I connect an ExpressLRS receiver, I presume the RPM output of the Hobbywing V5 ESC needs to be connected to the middle pin of the ELE/PIT/AIL input on the FBL, as described for the S-Bus receiver ?
According the Spirit documentation for Express LRS receiver, all Hobbywing ESC telemetry data should be available and transmitted from the FBL to the transmitter — visible in the telemetry window of e.g. EdgeTX (Radiomster TX16). Do I get the GPS telemetry data of the Spirit system, or any telemetry indication, the Spirit system is receiving a valid/ healthy GPS signal during flight, as well in EdgeTX. Having GPS data available in EdgeTX would be very helpful in case the helicopter gets lost in a cornfield.......
Spirit 3 connectivity, Telemetry GPS data.....
Hello,
yes, GeoLink data are passed through CRSF protocol so you can see the position, altitude, satellites and more.
yes, GeoLink data are passed through CRSF protocol so you can see the position, altitude, satellites and more.
Spirit System developer